PB_16
Copyright and Disclaimer
Copyright: Scott Hanson
This documentation describes Open Hardware and is licensed under the CERN Open Hardware License Version 2 - Strongly Reciprocal. (CERN-OHL-S)
You may redistribute and modify this documentation under the terms of the CERN OHL-S-v2 (https://ohwr.org/cern_ohl_s_v2.txt). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v2-S for applicable conditions
Under CERN OHL-S-v2, derivative work must be publicly released as defined in subsection 3.3
BBB 16
The BBB16 is a Beaglebone version of the PB16. All the design files are open source and available on github.
To order PCBs upload the “GERBER-BBB_16.zip” file in the “jlcpcb\production_files” folder to jlcpcb.com.
Part BOM
Interactive BOM
Changelog
v2.3
- Added cutable traces to OLED power pins that defaults to the common pinout.
v2.2
- Updated 5V regulator to “Universal” footprint to support different regulators.
v2.1
- Added power input ADC circuits.
v2
- Moved Beaglebone to bottom of PCB.
- Changed one RJ45 port to differential output.
- Added Aux Power port.
- Changed to 24pin Expansion port.
- Changed power terminals to screw terminals.
- Removed Audio Breakout Header.
v1.4
- Fix EEPROM I2C.
v1.3
- Fix Buttons and GPIO.
v1.2
- Added Audio Breakout Header.
- Switch to 33ohm resistors for pixel outputs.
v1
- First version.
- BBB on top
- OLED.
- Buttons.
- GPIO port.
- Side Entry power ports.